Ilmenite, aluminum and graphite can be used to produce in-situ Al2O3/TiC–Fe composites which are used as cutting tools. Few publications can be found in the literature that discusse the effect of molar ratio of aluminum and graphite on the Al2O3/TiC–Fe formation mechanism. Therefore, the present research is designed to make the issue clear.  To achieve this goal, at first, the mechanism o...

in this study, aluminium2024- graphite composites containing 5, 10, 15 and 20 weight percent of graphite were produced by solid assisted melt disintegration (samd) technique which resulted in production of al/gr powder mixtures which subsequently consolidated and sintered for preparation of al/gr composites. in this technique, powder mixture was prepared by addition of flake graphite (mean diam...

Al2O3/TiC composites are used as cutting tools for machining gray cast iron and steels. The addition of iron improves the toughness of Al2O3/TiC composites. Ilmenite, aluminum and graphite can be used to produce in-situ Al2O3/TiC–Fe composites. However, the formation mechanism and reaction sequences of this system are not clear enough. Therefore, the present research is designed to determ...

friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized al2o3 and micro sized graphite particles. a mixture of al2o3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. packed groove was subjected to friction stir processing in order to im...

Friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized Al2O3 and micro sized graphite particles. A mixture of Al2O3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. Packed groove was subjected to friction stir processing in order to im...

In this study, Aluminium2024- Graphite composites containing 5, 10, 15 and 20 weight percent of graphite were produced by solid assisted melt disintegration (SAMD) technique which resulted in production of Al/Gr powder mixtures which subsequently consolidated and sintered for preparation of Al/Gr composites. In this technique, powder mixture was prepared by addition of flake graphite (mean diam...

An electrochemical analysis on a single channel PEM fuel cell was carried out by Computational Fuel Cell Dynamics (CFCD). The objective was to assess the latest developments regarding the effects of change in the current collector materials, porosity of electrodes and gas diffusion layer on the fuel cell power density. Graphite, as the most applicable current collector material, was applied fol...

Aluminum and its alloys have a lot of industrial applications due to their appropriate physical and chemical characteristics. However, those present a modest mechanical performance. One method to improve its strenght is the addition of hard insoluble particles as: carbides (Al4C3, TiC), oxides (Al2O3) or nitrides (TiN, AlN), which can difficult the dislocation movement at atomic level, resultin...

In this study, Flake-like magnesium hydroxide (Mg(OH)2) and cubic-like aluminum hydroxide (Al(OH)3) nanostructures were synthesized via a simple co-precipitation method at relatively low temperature. Chemical properties and surface morphology of the magnesium hydroxide and aluminum hydroxide were characterized by X-ray diffraction analysis (XRD), scanning electron microscopy image (SEM), transm...